All Arch Types.
Dean Karnazes' Response Insoles are heat moldable, so they fit and support your unique foot shape perfectly. These custom insoles feature an orthopedic base layer that molds to your unique foot without losing its supportive shape.
Footbed customization can be performed by wearing the insoles or by using heat which is easy and only requires a few simple steps. To customize your footbeds by wearing them, place them in your footwear and wear as with any other shoe. After a few days the footbeds will be molded to your unique foot shape.
- An Opti-therm indicator turns black when your insoles are ready to be taken out of the oven and molded. (maximum of 3 minutes)
- Polygiene® antimicrobial agent is used to control odors.
- Perforations, throughout the insole in non-structural areas, reduce overall weight.
- Ventilated Softec cushion layer provides unparalleled shock absorption and increased airflow.
- A moldable orthopedic base layer, consisting of 20% recycled content, contours to the unique shape of your foot without losing its supportive properties.
- Moisture wicking top sheet is made from 35% recycled content.
- A deep heel cup aligns your foot during heel strike.
- Custom arch support aligns and supports your foot.
Sole Custom Footbeds are heat moldable in a few easy steps, so they fit your unique foot perfectly. The generic insoles that are supplied with your footwear are designed to fit the lowest common denominator foot shape. They simply cannot offer the same level of arch support, control and comfort that heat moldable Sole Custom Footbeds do.
Simple Steps to Customize:
Step 1: Preheat the oven. Do not use a microwave.
Step 2: Remove the factory insoles from your foot wear. If the insole cannot be removed because it is permanently glued in, leave them in place.
Step 3: If you need to trim your footbeds to fit into your footwear, use your old insole as a guide. Warning: Only trim to the toe end and do not cut them too short.
Step 4: Place the footbeds in the oven on a baking sheet until the Opti-therm indicator turns black.
Step 5: Remove the footbeds from the oven and immediately put them into your footwear.
Step 6: Put your shoes on right away making sure your heels are against the back of the shoes before lacing them up.
Step 7: Stand up straight with your feet shoulder width apart and your toes pointed forward for two minutes.
Dean Karnazes is a world famous endurance runner, known for his amazing feats of physical & mental stamina. Feats like running 350 miles non-stop, and recently running The North Face Endurance 50 - 50 marathons, in each of the 50 United States, in 50 consecutive days, all with Sole inside every step of the way!
Dean Karnazes relies on Sole Custom Footbeds to provide custom support and comfort while he runs unimaginable distances. Together, Dean and Sole have designed a signature edition footbed to meet the needs of both hardcore endurance runners and the casual runner alike.
Sole is proven to reduce pain and increase performance and endurance, while decreasing fatigue and the chance of injury. From world class athletes to construction workers, from the military to the board room, Sole is custom fitting the world's footwear, one Sole at a time.
90-day satisfaction guarantee through Sole.
Recipient of the American Podiatric Medical Association Seal of Acceptance, which recognizes products that have been found beneficial to foot health, and of significant value when used in a consistently applied program of daily foot care and regular professional treatment.
Men's 3.5-4 / Women's 5.5-6 Size C:
Men's 4.5-5 / Women's 6.5-7 Size D:
Men's 5.5-6 / Women's 7.5-8 Size E:
Men's 6.5-7 / Women's 8.5-9 Size F:
Men's 7.5-8 / Women's 9.5-10 Size G:
Men's 8.5-9 / Women's 10.5-11 Size H:
Men's 9.5-10 / Women's 11.5-12 Size I:
Men's 10.5-11 / Women's 12.5-13 Size J:
Men's 11.5-12 / Women's 13.5-14 Size K:
Men's 12.5-13 / Women's 14.5-15
*U.S. Shoe Size Equivalent